Internet-in-a-Box (IIAB) 8.2 pre-releases are thoroughly tested, and can be installed from this page! Please read our DRAFT IIAB 8.2 Release Notes.

To install IIAB 8.2 onto Raspberry Pi OS, Ubuntu 24.04+, Linux Mint 22+ or Debian 12+, simply run this 1-line installer:

curl iiab.io/install.txt | bash

On a Raspberry Pi, WE RECOMMEND YOU INSTALL THE LATEST RASPBERRY PI OS (64-bit is recommended), using their detailed instructions if necessary. WARNING: THE NOOBS OS IS *NOT* SUPPORTED, as its partitioning is very different. To attempt an IIAB install onto a non-supported Linux distribution (AT YOUR OWN RISK) see also the manual/legacy instructions.

An Ethernet cable is highly recommended during installation. This is more reliable AND allows an internal IIAB hotspot to be set up without confusion. WARNING: IF YOU CONNECT YOUR IIAB'S INTERNAL WI-FI TO THE INTERNET OVER 5 GHz, YOU'LL PREVENT OLDER LAPTOPS/PHONES/TABLETS (WHICH REQUIRE 2.4 GHz) FROM CONNECTING TO YOUR IIAB'S INTERNAL HOTSPOT. For AP+STA mode, set "wifi_up_down: True" in /etc/iiab/local_vars.yml (example).

Thanks For Building Your Own Library To Serve One & All

Please contact us if you find issues, Thank You! Special Thanks to the countries + communities + volunteers working non-stop to bring about IIAB 8.2 !

IIAB Dev Team
http://FAQ.IIAB.IO

Internet-in-a-Box (IIAB) 6.7 can be installed from this page.

Please read our IIAB 6.7 Release Notes.  To install IIAB 6.7 onto
Raspbian Stretch, Ubuntu 18.04 or Debian 9, run this 1-line installer:

             curl d.iiab.io/6.7/install.txt | sudo bash

OS TIPS & TRICKS: click the above link (that ends in .txt) for important
recommendations on how to PREPARE & SECURE YOUR OS.

WARNING: NOOBS IS *NOT* SUPPORTED, as its partitioning is very different.
On a Raspberry Pi, you need to INSTALL THE LATEST VERSION OF RASPBIAN.
To attempt IIAB 6.7 on another Linux see the full/manual instructions.

An Ethernet cable is HIGHLY RECOMMENDED during installation, as this is more
reliable than Wi-Fi (and faster too!)  If however you must install over Wi-Fi,
remember to run "iiab-hotspot-on" after IIAB installation, TO ACTIVATE YOUR
RASPBERRY PI's INTERNAL WIFI HOTSPOT (thereby killing Internet connectivity!)

        Thanks For Building Your Own Library To Serve One & All

Write to bugs @ iiab.io if you find issues, Thank You!  Special Thanks to the
countries+communities+volunteers who worked non-stop to bring about IIAB 6.7!

IIAB Development Team
http://FAQ.IIAB.IO